The Belay Gate is a simple way to reinforce the proper use of auto belay devices.
While clipped into the auto belay the triangular gate blocks the initial foot holds and hand holds of a climbing lane. Once the climber transfers the auto belay carabiner from the gate to their harness, the Belay Gate lays flat on the floor, opening the climbing lane and alerting others there is a climber above.
The two lower loops can be attached simply by screwing them into the wall (screw in foot holds are an option), or by using bolt hangers/bolts (adjustable webbing clips make doing so easy). The words 'Clip In' are in plain view when the gate is up on the wall, and the words 'Climber Above' warns others when the auto belay is in use. The contrast in colors on each side provides additional attention...blue when the gate is up and yellow when the gate is down.
1/4" foam adds padding and gives the gate structure up on the wall or while lying flat on the ground.
- 420 Denier Nylon
- 1/4" Foam
- 48" w
- 41" h
- Lower webbing straps adjust from 1-17"
- Color: Blue/Yellow
- Made in the USA